洛川縣位于中國陜西省中部。延安市南部。（東經109°13′14〞-109°45′47〞，北緯35°26′29〞-36°04′12〞?？偯娣e1886平方千米?？?cè)丝?0萬人，1990年人口17.61萬，漢族為主。秦、漢置鄜縣，魏、晉匈奴入據，后秦姚萇建初八年（393）劃鄜縣北部置洛川縣，因境
| 項目Item |型號Medol | KXT-1 | KXT-2 | KXT-3 | A、如介質油，酸堿物質 B、工作溫度有特殊要求 C、也可來函來圖定制 D、訂貨時需說明 A. If media is oil, acid or alkali. B. If special requirements for working temperature C. If OEM orders with drawings or samples D. Please Inform us about above when ordering |
| 工作壓力MpaWoring pressure | 1.0(10) | 1.6(16) | 2.5(25) | |
| 爆破壓力Mpa Burst Pressure | 2.0(20) | 3.0(30) | 4.5(45) | |
| 真空度 Kpa Vacuum | 53.3(400) | 86.7(650) | 100(750) | |
| 適用溫度℃Applicable Temperature | -20℃~+115℃（特殊可達-30℃~+250℃）-20℃~+115℃(-30℃~+250℃ under special conditions) | |||
| 適用介質Applicable Medium | 空氣、壓縮空氣、水、海水、熱水、油、酸、堿等Air, compressed air, water, sea water, oil, acid, alkali, etc. | |||
| 注：主要零件材料同KXT型 Note: the materials of main parts are the same with those of KXT type | ||||
| 公稱通徑DN Nominal Diameter （mm） |
長度 LengthLmm |
特殊長度 LengthLmm |
軸向位移 Axial displacement mm |
橫向位移 Haorizontal isplacement mm |
偏轉角度 Angular deflection(a1+a2)° |
||
| mm |
英寸inch |
伸長Extension | 壓縮Compression | ||||
| 32 | 1.25 | 95 | 130/150 | 6 | 9 | 9 | 15 |
| 40 | 1.5 | 95 | 130/150 | 6 | 10 | 9 | 15 |
| 50 | 2 | 105 | 130/150/200 | 7 | 10 | 10 | 15 |
| 65 | 2.5 | 115 | 130/150/200 | 7 | 13 | 11 | 15 |
| 80 | 3 | 135 | 130/150/200 | 8 | 15 | 12 | 15 |
| 100 | 4 | 150 | 130/200 | 10 | 19 | 13 | 15 |
| 125 | 5 | 165 | 130/150/200 | 12 | 19 | 13 | 15 |
| 150 | 6 | 180 | 130/150/200 | 12 | 20 | 14 | 15 |
| 175 | 7 | 200 | / | 12 | 20 | 14 | 15 |
| 200 | 8 | 200 | 130/150/210 | 16 | 25 | 22 | 15 |
| 225 | 9 | 200 | / | 16 | 25 | 22 | 15 |
| 250 | 10 | 230 | 130/150/200 | 16 | 25 | 22 | 15 |
| 300 | 12 | 245 | 130/150/200 | 16 | 25 | 22 | 15 |
| 350 | 14 | 255 | 130/150/200 | 16 | 25 | 22 | 15 |
| 400 | 16 | 255 | 200 | 16 | 25 | 22 | 15 |
| 450 | 18 | 255 | 200 | 16 | 25 | 22 | 15 |
| 500 | 20 | 255 | 200 | 16 | 25 | 22 | 15 |
| 550 | 22 | 255 | / | 16 | 25 | 22 | 15 |
| 600 | 24 | 260 | 200 | 16 | 25 | 22 | 15 |
| 700 | 28 | 260 | / | 16 | 25 | 22 | 15 |
| 800 | 32 | 260 | / | 16 | 25 | 22 | 15 |
| 900 | 36 | 260 | / | 16 | 25 | 22 | 15 |
| 1000 | 40 | 260 | / | 18 | 26 | 24 | 15 |
| 1200 | 48 | 260 | / | 18 | 26 | 24 | 15 |
| 1400 | 56 | 350 | / | 20 | 28 | 26 | 15 |
| 1600 | 64 | 350 | / | 25 | 35 | 30 | 10 |
| 1800 | 72 | 350 | / | 25 | 35 | 30 | 10 |
| 2000 | 80 | 350 | / | 25 | 35 | 30 | 10 |
| 2200 | 88 | 400 | / | 25 | 35 | 30 | 10 |
| 2400 | 96 | 400 | / | 25 | 35 | 30 | 10 |
| 2600 | 104 | 400 | / | 25 | 35 | 30 | 10 |
| 2800 | 112 | 400 | / | 25 | 35 | 30 | 10 |
| 3000 | 120 | 400 | / | 25 | 35 | 30 | 10 |
| 注：1、特殊要求可按用戶圖紙制作，法蘭標準采用9115.1-2000，可選配（GB、JB、HG、CB、ANSI、DIN、BSEN、NF、EN、JIS、 等）法蘭標準生產。橡膠球體可做天然橡膠、三元乙丙橡膠、氯丁橡膠、丁基橡膠、丁晴橡膠、氟橡膠等。 2、懸空給水使用DN200以上產品，管道必須有固定支撐或固定托架，否則產品應安裝防拉脫裝置。 3、用戶使用橡膠接頭，對應法蘭應是閥門法蘭或符合9115.1(RF)法蘭。 Notes: 1. For OEM orders with special requirement, rubber joints can be made according to customers' drawings. Generally, flange standard is 9115.1-2000, other GB, JB, HG, CB, ANSI, DIN, BSEN, NF, EN, JIS, flanges are also available upon request. Material of rubber body can be NR natural rubber, EPDM, Neoprene, IIR butyl rubber, NBR Buna-N, FKM, etc. 2.When rubber joints size above DN200 are used for overhead water supply system, the pipes must be equipped with fixed supports or fixed brackets, otherwise control units shall be installed on rubber joints. 3.Matching flanges of rubber joints shall be valve flanges or 9115.1(RF) flanges. |
|||||||
鑫利管道設備有限公司版權所有 ICP備案：豫ICP備12016377號-2
